Best Speaker Stands for Clearer Sound

The best speaker stand for most people is the SANUS Height Adjustable Speaker Stands for Satellite and Bookshelf Speakers, because an adjustable column plus a built-in cable channel lets you put the tweeter at seated ear height with a normal pair of bookshelf or surround speakers and keep the wire out of sight without paying a premium tier price. It suits anyone building a stereo or 5.1 setup in a living room where each speaker weighs well under 20 lbs and the floor is a mix of carpet and hard surface. If you need a taller column to lift surround speakers above the back of a sofa, the PERLESMITH Universal Speaker Stands for Surround Sound, which extend from 33.3″ to 45.1″, are the premium pick. If you are outfitting a whole room on a tight budget, the USX MOUNT Universal Speaker Stands (30.0″ to 39.1″) cover the essentials for less. Tripod stands — the Amazon Basics, Rockville, NiuNyuNeu, Pyle and GZGDLJQ models below — are a different tool: they hold heavy PA cabinets up high for rehearsals and events rather than placing a bookshelf speaker at ear level. The rest of this guide is about matching stand height and platform size to your actual speaker dimensions.

Top 3 Picks

Best overall: SANUS Height Adjustable Speaker Stands

The SANUS pair is the most balanced option in this roundup: an adjustable column that covers the normal seated listening window, a cable channel that hides speaker wire inside the upright, and feet that work on both carpet and hard flooring. It is the stand to buy when your speakers are satellite or compact bookshelf models and you want them at ear height without a tripod’s wide footprint. Mid-range pricing keeps it reachable for a full 5.1 set.

Best budget: USX MOUNT Universal Speaker Stands

USX MOUNT covers a 30.0″ to 39.1″ adjustment window for a budget-tier price, which is exactly the band most surround speakers need. You give up some finish refinement and accessory polish, but the core job — holding a small speaker at a stable, correct height with a route for the cable — is fully covered. A sensible choice when you are buying four or five stands at once.

Best premium: PERLESMITH Universal Speaker Stands for Surround Sound

With a 33.3″ to 45.1″ range, this PERLESMITH pair reaches heights that most floor stands simply cannot, which matters when your surrounds need to sit above a sofa back or a side table. It is a floor stand rather than a tripod, so it stays planted, and the cable routing runs down the column. Premium pricing is justified by the taller, heavier column build.

Quick Comparison

How We Chose

This roundup is built from published product specifications, manufacturer documentation and the basic geometry of how a stand holds a speaker — not from first-hand use of any of these products. The first filter was category fit: floor stands, tripod PA stands and desktop risers solve different problems, so a stand only competes against others of its own type. Within each type we looked at four published variables that decide whether a stand actually works in a room. Height range, measured against the 36″–42″ seated ear-height target for home speakers and the 55″–72″ band for PA cabinets. Platform type and size, because a top plate smaller than the speaker’s footprint lets the cabinet overhang and rock. Weight capacity, judged against the 1.5× rule so there is headroom rather than a stand running at its limit. And cable management, since a stand with no routing path forces visible wire across the floor. Upgrade path was the final check: a stand that still fits when you change speakers is worth more than one that only matches the pair you own today.

1. PERLESMITH Universal Speaker Stands for Surround Sound – Best for tall surround speakers

The PERLESMITH Universal Speaker Stands for Surround Sound are the tallest floor-standing pair in this roundup, with columns that extend from 33.3″ to 45.1″ — the exact band you need when a surround speaker has to clear the arm of a sofa or sit above a side table. They are a floor stand rather than a tripod, so the base rests flat and the speaker sits on a top plate instead of being threaded onto a pole.

Who it suits: Anyone building a 5.1 or 7.1 system with satellite or small bookshelf surrounds that need to sit at or above seated ear height and stay there. It is also a good fit for a stereo setup with small speakers where a high sofa or a raised seating position pushes the tweeter above the standard 30″ mark.

Key specs:

• Height range: 33.3″ to 45.1″, continuously adjustable
• Format: floor-standing pair with a universal mounting plate and brackets
• Cable management: a channel and hook design so speaker wire runs down the column instead of across the floor
• Capacity: no weight rating published in the listing name; treat it as a satellite and compact-bookshelf stand rather than a large-monitor stand
• Finish: black, sized to disappear behind most furniture
• Assembly: tool-assisted, with the column sections joined before the top plate is fitted

Where it wins: the height ceiling. Most floor stands stop somewhere between 28″ and 36″, which is fine when a 10″ or 11″ bookshelf speaker sits on top and the tweeter lands at ear height — but it falls short the moment your seating is tall, your surrounds need to fire over a sofa back, or you want the speaker above a side table. The 33.3″ to 45.1″ window covers all three situations and still lets you drop the column down for a normal sofa. The universal plate is the second strength: because it accepts threaded inserts and bracket-style mounting rather than demanding one specific speaker shape, the stand survives a speaker upgrade. Stability at the top of the range depends more on the base footprint than on the column, so push the base back against the wall or into a corner when you run the stands tall, and keep the speaker wire routed down the column so nobody trips on a loop.

Pros

• The tallest adjustment range here, covering surround placement above furniture
• Cable channel keeps wire hidden and off the floor
• Universal mounting plate fits a wide range of small speakers
• Floor-standing base is far less of a trip hazard than a tripod’s splayed legs

Cons

• No published weight capacity, so heavy bookshelf speakers are a gamble
• Premium tier pricing for what is still a satellite-class stand
• Assembly is required and the tall setting rewards careful base placement

Compared with the nearest alternative: the SANUS pair is the mid-range rival and the more sensible buy if your surrounds sit at a normal 28″ to 32″ and your speakers are lightweight. Choose the SANUS for standard ear-height placement and a lower price; choose this PERLESMITH pair when 40″ plus is genuinely required. Against the budget USX MOUNT stands, which top out at 39.1″, the PERLESMITH gives you roughly six extra inches of ceiling and a sturdier column in exchange for the price jump.

2. SANUS Height Adjustable Speaker Stands – Best for satellite and bookshelf speakers

The SANUS Height Adjustable Speaker Stands are the most versatile pair here for ordinary living-room use, aimed squarely at satellite and bookshelf speakers that need to sit at seated ear height. The design is deliberately simple: an adjustable column, a top plate sized for small cabinets, and a cable channel that runs the speaker wire down the inside of the upright.

Who it suits: Listeners assembling a stereo pair or a 5.1 system in a normal room where the speakers weigh somewhere between 2 lbs and 15 lbs, the seating is a standard sofa, and the priority is getting the tweeter to roughly 36″ to 42″ off the floor. It is also a natural fit for anyone who wants the stands to look like furniture rather than equipment.

Key specs:

• Format: adjustable floor-standing pair for satellite and bookshelf speakers
• Height: adjustable column; check the current listing for the exact range, since the design has been offered in more than one variant
• Cable management: internal channel through the upright, with an exit at the base
• Feet: fittings for both carpet and hard flooring, so the stand does not rock on either
• Top plate: sized for compact cabinets rather than large monitors
• Finish: neutral black, low visual profile

Where it wins: balance. Nothing about this stand is extreme — the height range is not the tallest, the platform is not the largest, the price is not the lowest — and that is precisely why it works for the majority of rooms. The cable channel is the detail that matters most day to day: with the wire running inside the column, the run from an amplifier or receiver to a surround speaker disappears, and you stop looking at a black cable snaking across the carpet. The dual-purpose feet solve the other common annoyance, which is a stand that wobbles on a hard floor or sinks into a deep pile carpet; swapping the fitting takes a minute. Because the plate suits satellite and bookshelf cabinets, it also works for speakers with threaded inserts or keyhole brackets, so a future speaker swap is unlikely to strand the stands.

Pros

• Well-rounded design with cable management and floor-specific feet
• Adjustable height covers the standard seated listening window
• Mid-range pricing, so a full surround set stays affordable
• Neutral looks that suit a living room rather than a studio

Cons

• Adjustment range will not reach the 40″ plus heights some rooms need
• Top plate is not intended for large bookshelf cabinets or studio monitors
• Published specs vary by variant, so you must confirm the range before buying

Compared with the nearest alternative: the USX MOUNT pair does much the same job for a budget-tier price, with a published 30.0″ to 39.1″ range and a smaller satellite-oriented plate. If cost is the deciding factor and your speakers are light, the USX MOUNT is the smarter buy. The SANUS justifies its mid-range position with better finish, tidier cable routing and feet that handle both floor types. Against the premium PERLESMITH floor stands, the SANUS is the pick for normal-height placement; the PERLESMITH pair only wins when you need to go above 40″.

3. USX MOUNT Universal Speaker Stands – Best for budget surround setups

The USX MOUNT Universal Speaker Stands are the value option in this roundup, with a published height range of 30.0″ to 39.1″ and a top plate aimed at satellite speakers and small bookshelf cabinets. They cover the standard ear-height window without the extras that push mid-range and premium stands up in price.

Who it suits: Anyone kitting out a full 5.1 or 7.1 system at once, where four or five stands make per-unit price the deciding factor. It also suits a first stereo setup with compact speakers, or a second room where the stands need to be functional rather than beautiful.

Key specs:

• Height range: 30.0″ to 39.1″, adjustable
• Format: floor-standing pair with a universal plate for satellite and small bookshelf speakers
• Mounting: bracket-style attachment suited to compact cabinets
• Cable management: a routing path down the column, in line with the rest of the budget class
• Finish: black
• Assembly: required, with the column built up before the plate goes on

Where it wins: the arithmetic of buying several stands. When a surround system needs four or five uprights, the difference between budget and premium tiers multiplies fast, and the practical result at ear height is similar as long as the speaker is light and the floor is level. The 30.0″ to 39.1″ range is genuinely useful — it starts at the height most small satellites need and reaches high enough to clear a low sofa back — so you are not sacrificing the function that matters. What you give up is refinement: finish is plainer, the top plate is sized for smaller cabinets, and the adjustment hardware is more utilitarian than on mid-range stands. For a room where the stands sit behind furniture and nobody looks at them closely, that trade is easy to make.

Pros

• Budget tier price makes a five-stand surround build realistic
• 30.0″ to 39.1″ range covers the standard ear-height target
• Universal plate accepts most small satellite and bookshelf speakers
• Simple design with few parts to fail

Cons

• Finish and hardware feel basic next to mid-range options
• Not intended for large bookshelf cabinets or heavy monitors
• Cable routing is less polished than on the SANUS pair

Compared with the nearest alternative: the Anautin Universal Speaker Stands overlap heavily, with a 28″ to 38″ range and a similar budget position — the two are near-substitutes, and the decision usually comes down to which is currently easier to buy as a pair. Step up to the SANUS stands and you gain better finish, tidier cable management and dual floor feet; stay with USX MOUNT and you keep more of the budget for the speakers themselves. For most buyers with light satellites, that trade favours USX MOUNT.

4. Amazon Basics Adjustable Height Tripod Speaker Stand – Best for heavy PA cabinets on a budget

The Amazon Basics Adjustable Height Tripod Speaker Stand is a steel tripod that extends from 52″ to 73″ and is rated to hold up to 99.2 lbs — by far the highest published capacity in this roundup. It is a PA and event stand, not a living-room floor stand, and it is priced in the budget tier despite the load rating.

Who it suits: Musicians, DJs, presenters and anyone running a small PA who needs a cabinet up at head height or above. It also suits a home setup with a heavy powered speaker that no platform stand here could safely carry.

Key specs:

• Height range: 52″ to 73″
• Capacity: rated up to 99.2 lbs
• Construction: steel tripod with a pole-mount top
• Format: single stand with a tripod base and collapsible legs
• Finish: black
• Folded footprint: legs collapse for transport

Where it wins: the combination of a 99.2 lb rating and a 52″ to 73″ range at a budget price. That range puts a cabinet’s horn above a standing audience’s head, which is what you want for even coverage across a room: if the top of the speaker is at roughly 6 feet, the high frequencies reach the back row instead of being absorbed by the people in front. The steel construction and wide tripod base handle the weight without the column flexing. Because the top is a pole mount rather than a platform, the stand is only suitable for speakers with a matching socket — this is not a stand you can put a bookshelf speaker on. Set-up is quick, the legs splay for stability, and the whole thing collapses into a compact bundle, which is why tripods dominate the portable PA category.

Pros

• 99.2 lb capacity dwarfs every platform stand in this guide
• 52″ to 73″ range suits standing-audience coverage
• Steel construction and a wide tripod base
• Budget tier pricing for a genuinely heavy-duty rating

Cons

• Pole mount only — no platform for bookshelf or satellite speakers
• Tripod legs occupy floor space and are a trip hazard in a small room
• Single stand rather than a pair

Compared with the nearest alternative: the Rockville RVES1 is the mid-range counterpart and the better buy for gigging because it comes as a pair with a carry bag, which is worth real money if you move the stands regularly. The Amazon Basics stand wins on raw capacity and on price for a single unit. Against the Pyle 2-pack, which also runs from 40″ to 71″ in the premium tier, the Amazon Basics gives up height adjustment at the low end but keeps the higher load rating and the lower price. For a permanent install with one heavy cabinet, it is the straightforward choice.

5. Rockville RVES1 Pair Adjustable Tripod PA Speaker Stands – Best for gigging with a carry bag

The Rockville RVES1 pair is the practical choice for anyone who moves their speakers: two adjustable tripod PA stands with a pole-mount top and a carry bag included. It sits in the mid-range tier and is aimed at bands, DJs and mobile presenters rather than living rooms.

Who it suits: Working musicians and mobile DJs who set up and tear down regularly and want a matched pair with a bag rather than two separate stands. It also suits a school, church or community hall that needs portable speaker support that stores flat between events.

Key specs:

• Format: pair of adjustable tripod PA stands
• Top: pole-mount fitting for cabinets with a standard socket
• Included: carry bag for transport and storage
• Legs: collapsible tripod base
• Height: adjustable; confirm the current published range on the listing, since PA tripods commonly span roughly 40″ to 70″ plus
• Finish: black

Where it wins: being a complete kit. Buying two tripods separately often means buying two bags separately as well, and a bag is the difference between stands that survive five years of van travel and stands with chewed-up collars and scratched poles. The pair is matched, so both cabinets sit at the same height, which matters for stereo imaging: mismatched stand heights tilt the image and blur the centre. The pole-mount top is the standard fitting for PA cabinets, so it works with the majority of powered speakers that have a socket underneath. The tripod geometry spreads the load over three points and keeps the centre of gravity low when the pole is extended, which is why this format has stayed the default for portable sound for decades.

Pros

• Sold as a matched pair with a carry bag included
• Standard pole mount fits most PA cabinets with a socket
• Tripod base is stable with tall, heavy cabinets
• Collapses for transport and storage

Cons

• No platform, so it cannot hold bookshelf or satellite speakers
• Legs take up floor area and are easy to trip over in tight spaces
• Mid-range pricing for a format that has budget alternatives

Compared with the nearest alternative: the NiuNyuNeu tripod pair covers a taller 43.7″ to 70.8″ range with a 35 mm pole insert, which suits DJs who want the cabinets particularly high; the Rockville kit wins on the included bag and the matched-pair convenience. Against the premium Pyle 2-pack with its 40″ to 71″ range, the Rockville is the lighter-duty but cheaper option. If the stands never leave the room, the Amazon Basics tripod delivers more capacity for less; if they travel every weekend, the bag makes the Rockville pair the better long-term buy.

6. PERLESMITH Universal Floor Speaker Stands (22 lbs) – Best for compact satellite speakers

The PERLESMITH Universal Floor Speaker Stands are a premium-tier pair with a published capacity of up to 22 lbs, built for surround-sound satellites and small bookshelf speakers. They are the shorter, platform-style counterpart to the taller PERLESMITH stands elsewhere in this list.

Who it suits: Listeners with lightweight satellites — the kind that come with a 5.1 package and weigh a few pounds each — who want them off the wall and at ear height on a stable floor stand. It also suits anyone who prefers a platform design to a tripod because the base stays flat and out of the way.

Key specs:

• Capacity: rated up to 22 lbs per stand
• Format: floor-standing pair with a small universal top plate
• Cable management: routing down the column to keep wire off the floor
• Mounting: bracket and insert compatible for compact cabinets
• Finish: black
• Assembly: required, with the plate fitted after the column is built

Where it wins: the published 22 lb rating. Many budget and mid-range stands never state a capacity at all, which leaves you guessing whether a 12 lb speaker is fine or already too much. A stated 22 lbs means a 10 lb to 15 lb satellite sits comfortably inside the limit, and even the 1.5× headroom rule is satisfied for anything up to roughly 14 lbs. The platform design is the second advantage: because the speaker rests on a plate rather than being threaded onto a pole, you can angle it slightly and it will not rotate out of position over time. The small top plate suits the compact cabinets these stands are aimed at, and the cable routing keeps a surround install tidy, which matters most in the rear corners of a room where wire runs are longest and most visible.

Pros

• Published 22 lb capacity removes the guesswork
• Platform design suits compact satellite cabinets
• Cable management keeps surround wiring tidy
• Stable floor-standing base rather than splayed tripod legs

Cons

• 22 lbs is the lowest published ceiling in this roundup
• Small top plate will not suit large bookshelf cabinets
• Premium pricing for a compact-speaker stand

Compared with the nearest alternative: the Anautin pair is the budget alternative with a 28″ to 38″ adjustable range, and it is the better buy if your satellites are light and cost matters. The 22 lb PERLESMITH pair justifies its premium tier with a stated capacity and tidier cable routing. Against the taller PERLESMITH stands, the choice is purely about height: this pair is the one for normal ear-height placement with compact speakers, while the 33.3″ to 45.1″ model is the one for surrounds that must clear furniture.

7. NiuNyuNeu Speaker Tripod Stands – Best for tall DJ and PA placement

The NiuNyuNeu pair of speaker tripod stands covers a 43.7″ to 70.8″ range and uses a 35 mm pole insert, which is the standard socket size on the majority of PA and DJ cabinets. It is a mid-range pair aimed at anyone who needs speakers genuinely high off the floor.

Who it suits: DJs who want the tops of their cabinets above a standing crowd, mobile entertainers who need the speakers to clear a booth or table, and anyone running a PA in a room where the audience stands rather than sits.

Key specs:

• Height range: 43.7″ to 70.8″, adjustable
• Mount: 35 mm pole insert, the common PA cabinet socket size
• Format: pair of tripod stands
• Legs: collapsible tripod base
• Finish: black
• Storage: folds down for transport

Where it wins: the 35 mm insert and the height band. The 43.7″ to 70.8″ range starts higher than most general-purpose tripods, so it is aimed at standing-audience work rather than seated listening; at the top of the range a cabinet’s horn sits well above head height, which is what produces even coverage across a room instead of a beam that hits the front row and dies. The 35 mm insert matches the socket on most DJ and PA cabinets, so the stands work with equipment you already have rather than forcing a specific speaker. Tripod geometry keeps the load over three feet, and the collapsible legs mean the pair packs down small. For a wedding, a party or a small venue, this is the format that gets sound over people rather than into their backs.

Pros

• 43.7″ to 70.8″ range suited to standing audiences
• 35 mm pole insert fits most PA and DJ cabinets
• Collapsible tripod legs pack down for transport
• Mid-range pricing for a matched pair

Cons

• Pole mount only, with no platform for home speakers
• No carry bag included
• Wide leg spread needs clear floor space

Compared with the nearest alternative: the Rockville RVES1 pair is the closest rival and includes a carry bag, which makes it the stronger pick for anyone transporting stands weekly. The NiuNyuNeu pair wins on the higher top end and the explicitly stated 35 mm insert. Against the premium Pyle 2-pack with its 40″ to 71″ range, the NiuNyuNeu covers a similar span for less money but with less heavy-duty build. If the stands stay in one venue, the extra cost of the Pyle set buys durability rather than height.

8. Mounting Dream Height Adjustable Speaker Stands – Best for bookshelf speakers

The Mounting Dream Height Adjustable Speaker Stands are a premium-tier pair designed specifically around bookshelf speakers, with an adjustable column and integrated cable management. Mounting Dream is best known for TV and monitor mounting hardware, and that background shows in the bracket-and-plate approach here.

Who it suits: Listeners running a proper stereo pair or a front-stage set of bookshelf speakers — cabinets with a 5″ to 6.5″ woofer — who want them at ear height with the wire hidden. It also suits anyone who wants the mounting hardware to feel engineered rather than improvised.

Key specs:

• Format: adjustable floor-standing pair for bookshelf speakers
• Height: adjustable column; confirm the current published range on the listing
• Top plate: sized for bookshelf cabinets rather than small satellites
• Cable management: integrated routing through the column
• Mounting hardware: bracket and plate design consistent with the brand’s mounting background
• Finish: black

Where it wins: the plate. Bookshelf speakers are the awkward middle case in the stand market: too heavy and too wide for satellite plates, too light and too small for PA tripods. A stand with a plate proportioned for a bookshelf cabinet gives the speaker full support rather than letting the corners overhang, and overhang is what makes a cabinet rock when the bass hits. Combined with an adjustable column, that means you can set the tweeter at seated ear height — around 36″ to 42″ in most rooms — which is the single change that most reliably sharpens stereo imaging and vocal clarity, because it puts the tweeter axis on your ear axis instead of firing at your knees. Integrated cable management keeps the run to an amplifier tidy, and the brand’s mounting heritage suggests the bracket hardware will hold adjustment without slipping.

Pros

• Plate proportioned for bookshelf cabinets rather than tiny satellites
• Adjustable height lets you match the tweeter to seated ear level
• Integrated cable management
• Bracket hardware from an established mounting brand

Cons

• Premium tier pricing
• Published height range should be confirmed before buying
• Not intended for large monitors or heavy cabinets

Compared with the nearest alternative: the SANUS pair is the mid-range alternative and covers the same job for less, with a smaller plate that suits compact cabinets better than full bookshelf boxes. Choose Mounting Dream when your speakers are genuine bookshelf size and you want the plate to match; choose SANUS when the speakers are smaller and the budget matters. Against the PERLESMITH 22 lb floor stands, the Mounting Dream pair is the better match for heavier bookshelf cabinets, while the PERLESMITH pair suits lighter satellites.

9. Anautin Universal Speaker Stands Pair – Best for small surround speakers on a budget

The Anautin Universal Speaker Stands are a budget-tier pair with a 28″ to 38″ adjustment range, aimed at satellite speakers and small bookshelf cabinets in surround-sound setups. They are one of the lowest-cost ways to get four or five speakers up to ear height.

Who it suits: Buyers assembling a full surround system on a tight budget, and anyone who needs stands that adjust across a modest range rather than reaching for the ceiling. It is also a reasonable choice for a small stereo setup in a study or bedroom.

Key specs:

• Height range: 28″ to 38″, adjustable
• Format: pair of floor stands with a universal plate for satellite and small bookshelf speakers
• Mounting: bracket-style attachment
• Cable management: a routing path down the column, in line with the budget class
• Finish: black
• Assembly: required

Where it wins: the entry point. A 28″ to 38″ window is exactly what small satellites need: at the low end it suits a low seat and a short speaker, and at the top it clears a low sofa back. Buying a pair at budget pricing means a 5.1 system can be furnished for roughly the cost of a single mid-range pair, which is the difference between putting all the speakers at the right height and leaving two of them on the floor. The universal plate accepts the bracket or insert fittings that most satellite speakers use, so it is not tied to one model. Set-up is straightforward, and the simple column design leaves little to go wrong over time — a genuine advantage for stands that sit behind furniture and are rarely touched.

Pros

• Budget tier pricing makes a five-stand surround build affordable
• 28″ to 38″ range covers the normal ear-height target
• Universal plate suits most small satellites and compact bookshelf speakers
• Simple design with minimal hardware

Cons

• No published weight capacity
• Finish and hardware are basic
• Not suited to large bookshelf cabinets or heavy monitors

Compared with the nearest alternative: the USX MOUNT pair is the direct rival, with a 30.0″ to 39.1″ range and a similar budget position — the Anautin starts an inch or two lower, which can matter if your seating is low, while the USX MOUNT reaches slightly higher. Treat them as near-equivalents and buy whichever is available as a pair when you order. Stepping up to the SANUS stands buys better finish and dual-purpose feet; the Anautin keeps more budget for the speakers themselves, which usually improves the sound more than the stand does.

10. Pyle Universal Speaker Stand 2-Pack – Best for heavy-duty tripod mounting

The Pyle Universal Speaker Stand 2-Pack is a premium-tier pair of heavy-duty tripod mounts with a 40″ to 71″ adjustable height. Pyle has been a long-standing name in pro-audio accessories, and this set is aimed at permanent installs and frequent use rather than occasional gigs.

Who it suits: Venues, rehearsal rooms and mobile setups that need two tripods built to take repeated use, plus anyone with heavier PA cabinets who wants a platform-style tripod rather than the lightest option available. It also suits buyers who want a pair from a single order rather than two separate purchases.

Key specs:

• Height range: 40″ to 71″, adjustable
• Format: 2-pack of heavy-duty tripod stands with pole-mount tops
• Legs: collapsible tripod base
• Mount: pole fitting for PA cabinets with a socket
• Finish: black
• Build class: heavy-duty, aimed at repeated set-up and tear-down

Where it wins: